Anker SOLIX C200 DC Runtime Calculator
192 Wh LiFePO4 · DC only, no AC outlet · runs a 10 W Wi-Fi router about 12–14 h on DC
- AC output
- DC only
Specs verified 10 Oct 2026 from ankersolix.com. Some specs are not published or not yet confirmed.
KiloHour is independent and not affiliated with or endorsed by Anker SOLIX. Anker SOLIX and product names are trademarks of their respective owners. Images: Anker SOLIX.
At a glance
What the SOLIX C200 DC runs
From its 12 V and USB-C ports, 0 of 6 listed devices last their usual hours, the fridge, microwave (1,000 w cooking power), space heater, tv, cpap with humidifier and wi-fi router do not.
- Can't run it
Fridge 123 W
Not available
Needs an AC outlet, and this model has none.
- Can't run it
Microwave (1,000 W cooking power) 1500 W
Not available
Needs an AC outlet, and this model has none.
- Can't run it
Space heater 1500 W
Not available
Needs an AC outlet, and this model has none.
- Can't run it
TV 120 W
Not available
Needs an AC outlet, and this model has none.
- Tight fit
CPAP with humidifier 34 W
4 h
On the 12 V or USB-C path.
- Tight fit
Wi-Fi router 10 W
12–14 h
On the 12 V or USB-C path.
Spec sheet
SOLIX C200 DC verified specs
Spot an error? Report it
Our take
What the C200 DC is good at, and what to watch for
KiloHour take Pick it if you only charge USB devices and want a 4.2 lb pack, but it has no AC outlets or car socket and holds just 192Wh.
The SOLIX C200 DC is a 192Wh LFP pack with no AC inverter. Anker rates it at 200W of total output across five ports, built around one 140W USB-C port that both charges the unit and powers devices. Anker's comparison table lists it at 4.2 lb and 3.9 by 4.3 by 7.3 inches, the lightest and smallest of the three small SOLIX C models, with a three-year warranty.
Charging happens mostly over USB-C. No charger comes in the box; Anker says any USB-C PD charger of 18W or more will work, lists 80 percent in 1.3 hours over the PD 3.1 port, and notes that full-speed charging needs a 140W charger. The XT60 input also takes 11 to 28V panels for up to 100W of solar.
Next to its siblings, the C200 DC is the stripped-down option. The C300 DC keeps the DC-only design but raises capacity to 288Wh and adds a second 140W USB-C port, a 120W car socket and a pop-out light, while the C300 adds AC outlets and a UPS mode. Anker's table lists no car socket, no light and no UPS for this model.
That makes it a fit for phones, tablets, cameras and USB-C laptops on day trips and in a go bag. Anything with a wall plug or a 12V plug needs a different model.
Sources: ankersolix.com, ankersolix.com
Same brand
Other Anker SOLIX models
| Model | Capacity | AC output | Solar input | Weight |
|---|---|---|---|---|
| SOLIX C300Larger | 288 Wh (+96 Wh) | 300 W | 100 W | 9.1 lb |
| SOLIX C300 DCLarger | 288 Wh (+96 Wh) | DC only | 100 W | 6.17 lb |
| SOLIX C300XLarger | 288 Wh (+96 Wh) | 300 W | 100 W | Not published |
FAQ
SOLIX C200 DC questions
Answers use the same published specs and labelled assumptions as the calculator.
Does the C200 DC have an AC outlet?
No. It has no inverter, so it only powers 12 V and USB devices, up to 140 W from one USB-C port. A CPAP needs its maker's DC adapter to run from it.
How long will the C200 DC last?
192 Wh stored, about 173 Wh of it usable at the typical estimate.
What is the C200 DC solar input?
Its limit is 100 W, below a 200 W panel, so extra panel watts are clipped. Expect about 0.6 days of 5-hour sun to refill it. Panels are assumed to deliver 75% of their rating.
How heavy is the Anker SOLIX C200 DC?
4.2 lb. That is about 46 Wh per pound.
Which C200 DC specs are not published?
Not listed by Anker SOLIX: 12 V car port output.