BLUETTI Elite 100 V2 Runtime Calculator
1,024 Wh LiFePO4 · 1,800 W AC (3,600 W surge) · runs a 34 W CPAP with humidifier about 16–19 h
Specs verified 11 Oct 2026 from bluettipower.com
KiloHour is independent and not affiliated with or endorsed by BLUETTI. BLUETTI and product names are trademarks of their respective owners. Images: BLUETTI.
Computed by our engine
Real-use runtimes on the Elite 100 V2
| Use | Load | Typical runtime | Verdict |
|---|---|---|---|
| Fridge | 123 W, compressor on a third of the time | 16 h | Tight fit |
| CPAP with humidifier | 34 W, 8 h a night | 2.3 nights | Runs it |
| Router + laptop | 10 W all day, 50 W for 8 h | 22 h | Runs it |
| Space heater | 1,500 W on high | 32 min | Runs briefly |
| 24 h outage kit | Fridge, router, 3 LED bulbs, 2 phones | 11 h of 24 h | Tight fit |
From the specs
Where the Elite 100 V2 fits
Good for
- CPAP trips: 2.3 nights per charge
- A 1,500 W kettle or heater in short bursts: 32 min in total
- Starting a 1/3 HP well pump (about 3,000 W startup) within its 3,600 W surge rating
- Pass-through backup for a router or desktop: BLUETTI lists a 10 ms switchover
- Off-grid solar: 1,000 W of input can refill it in about 1.4 peak-sun hours
Not ideal for
- A full day of outage backup: the fridge kit needs about 2,197 Wh rated, it lasts 11 h
- Adding capacity later: no expansion battery is listed
From the maker
Quirks and manual notes
- BLUETTI says Power Lifting Mode is off by default and only runs pure resistive loads rated 1,800 W to 2,700 W; actual output stays at 1,800 W. Elite 100 V2 user manual, 5.3
- BLUETTI lists AC charging at 600 W in Standard and Silent modes and 1,200 W in Turbo, which reaches 80% in about 45 minutes. Elite 100 V2 user manual, 5.2
- BLUETTI lists 4,000+ cycles to 80% of original capacity. Elite 100 V2 tech specs
Spec sheet
Elite 100 V2 verified specs
Spot an error? Report it
Our take
What the Elite 100 V2 is good at, and what to watch for
KiloHour take Pick it if you want about 1 kWh with 1,800W of AC in a 25 lb case, and you can live with a car outlet that is rated only in amps.
The Elite 100 V2 packs 1,024Wh of LiFePO4 into an 11.5 kg (25 lb) case and delivers 1,800W of continuous AC. BLUETTI's tech specs list a 3,600W surge and 2,700W of Power Lifting; the manual says Power Lifting is only for pure resistive loads rated 1,800W to 2,700W, with actual output held at 1,800W.
Charging is its strongest area. The manual lists 600W from the wall in Standard mode and 1,200W in Turbo, with 80 percent in about 45 minutes, and solar reaches 1,000W on a 12 to 60V, 20A input. AC input including bypass is listed at 1,800W. The tech specs give a UPS switchover of 10 ms or less and 4,000+ cycles to 80 percent, with a five-year warranty, and the manual lists one 140W and one 100W USB-C port.
The weak spots are small. The 12V car outlet is listed as 12V/10A with no watt rating, so check it against any DC device before relying on it. The weight differs slightly between sources: 25 lb on the product page and 25.3 lb in the manual. BLUETTI's page calls 2,700W "Lifting Power", which is not a surge rating, so motors still have to start within the 3,600W surge.
Sources: bluettipower.com, s4.bluettipower.com
Alternatives
Closest alternatives by capacity
| Model | Capacity | AC output | Surge | Solar input | Weight | Chemistry | UPS |
|---|---|---|---|---|---|---|---|
| Anker SOLIX C1000 Gen 2 | 1,024 Wh | 2,000 W (+200 W) | 3,000 W | 600 W (−400 W) | 24.9 lb (−0.1 lb) | LiFePO4 | 10 ms |
| DJI Power 1000 V2 | 1,024 Wh | 2,600 W (+800 W) | Not published | Not published | Not published | LiFePO4 | 10 ms |
| EcoFlow DELTA 3 | 1,024 Wh | 1,800 W | 3,600 W | 500 W (−500 W) | 27.6 lb (+2.6 lb) | LiFePO4 | 10 ms |
FAQ
Elite 100 V2 questions
How long will the Elite 100 V2 last?
1,024 Wh stored, about 922 Wh of it usable at the typical estimate. At its full 1,800 W rating it empties in about 25–27 min.
What is Power Lifting on the Elite 100 V2?
Power Lifting accepts heating loads (kettles, heaters) rated up to 2,700 W but delivers at most 1,800 W, so they run at reduced power. Motors and electronics stay capped at 1,800 W. Motor starts can briefly pull up to 3,600 W.
What is the Elite 100 V2 solar input?
Up to 1,000 W of panels. A single 200 W panel needs about 1.6 days at 4.5 sun hours a day; panels at the full 1,000 W need about 1.4 peak-sun hours. Panels are assumed to deliver 75% of their rating.
Does the Elite 100 V2 work as a UPS?
BLUETTI lists a 10 ms switchover when wall power drops.
How heavy is the BLUETTI Elite 100 V2?
25 lb (11.5 kg). That is about 41 Wh per pound.